Skip to content
McCormickConstruction & Roofing · Dallas

Roof Replacement & Materials

Slate roof repair and installation in Dallas, TX

A slate roof can last generations, but one cracked slate, a rusted nail, or a careless satellite installer can let water into a Dallas home that otherwise looks untouched.

Historic two-story Swiss Avenue style Dallas home with gray natural slate roof and copper valleys, roofer on a hook
Quick answer

Slate roofing means natural split stone or synthetic slate installed with copper nails and copper flashing. Dallas homeowners need slate service for cracked pieces after hail, rusted fasteners, or failing valleys. Repairs typically run $525 to $2,240, synthetic slate installs $31,400 to $58,900, and natural slate on a full roof can reach $68,000 and higher.

Natural slate is split stone, quarried mostly in Vermont, Pennsylvania and New York, with some imported from overseas. Good hard slate outlasts almost every other roofing material, and around Dallas you see it on older estate homes in Highland Park, Preston Hollow and along Swiss Avenue, plus some newer custom builds. It is heavy, roughly eight to fifteen pounds per square foot depending on thickness, and it goes on with copper nails meant to outlast the stone. When a slate roof fails, it is usually the nails, the flashing or one broken piece, not the whole field.

Repairing slate is a separate skill from shingle work. A broken slate is removed with a slate ripper that cuts the hidden nails, then a new piece is slid in and held with a copper slate hook or a nail-and-bib method. Our crews carry slate hammers, rippers and stakes on every slate call, and we stock common sizes and colors so a small repair does not wait weeks. For homeowners who love the look but not the weight, we also install synthetic slate made from engineered polymers.

Signs a slate roof needs repair

  • Missing or slipped slates: Gaps in the field mean a nail has corroded or a slate has snapped at the nail line.
  • Rust streaks below slates: Iron or steel nails from an earlier repair are rusting through.
  • Flaking surface: Soft slate is peeling apart in layers, a sign of lower-grade stone near the end of its life.
  • Tar patches on the field: Someone sealed a crack with roofing cement, which traps water and stains the stone.
  • Thin or holed valleys: Old copper or galvanized valley metal has worn through and needs new metal.
  • Cracks after foot traffic: A cable or solar installer walked the roof without ladders or hooks.
Close view of a roofer's hands sliding a new purple-gray slate into place with a copper slate hook on an older Dallas

How we repair and install slate

  • We work off roof ladders and hook-on brackets so nobody stands directly on the slate field.
  • Broken pieces are cut free with a slate ripper and replaced with matched stone held by copper hooks or a nail-and-bib.
  • Tar and cement patches are scraped off and the slates beneath are reset or replaced so water can drain again.
  • Valleys, step flashing and chimney counterflashing are rebuilt in 16 or 20 ounce copper, soldered on site.
  • On new installs, we check the framing for slate weight and lay heavy underlayment with membrane in the valleys.
  • Synthetic slate is fastened per the manufacturer with stainless or ring-shank nails and vented at the ridge.

Slate on Dallas homes: hail, heat, and history

Most natural slate in Dallas went on older estate and historic homes, where it has handled close to a century of Texas weather. Hard slate barely notices the heat, but very large hail can crack thinner pieces, and a single storm can leave a scatter of broken slates across one slope. After the hail season from roughly March through June, we spend a lot of time replacing ten to forty slates on a roof and rebuilding a valley, not tearing anything off.

Matching is the real local challenge. Slate in North Texas came from many quarries over many decades, and colors range from gray and black to green, purple and mottled red. We pull salvage slate from teardowns when we can and buy new stone from the closest matching quarry when we cannot. Homes in Dallas historic districts can face landmark review for material changes, so we check with you before suggesting synthetic slate on a protected house.

Natural slate versus synthetic slate

Both give a home the same layered, hand-split look. The difference shows up in weight, cost, hail behavior and how long the roof will last before anyone has to touch it again. We install both and price them side by side so you can weigh the trade.

OptionBest forWhat to know
Hard natural slate (S1 grade)Historic and estate homes meant to last generationsHeaviest and costliest, but the stone can outlast several owners.
Soft natural slateRestorations matching existing soft stoneShorter life; best for matching an original roof rather than for new work.
Synthetic polymer slateHomes that want the look without the framing loadLightweight; many lines carry a Class 4 hail rating, and colors are uniform.
Reclaimed slateRepairs on older roofs needing a color matchSupply varies; we sort and sound each piece before it goes on your roof.
Copper flashing packageAny slate roof, natural or syntheticCopper matches slate life; galvanized steel will need replacing much sooner.

What slate roofing costs in Dallas

$525 to $2,240
slate repair visit covering broken pieces and minor flashing
Slate replacement, per piece with copper hook$54 to $96
Copper valley rebuild, per linear foot$47 to $82
Chimney counterflashing in copper$1,365 to $3,180
Synthetic slate installed, per square$1,085 to $1,640
Natural slate installed, per square$1,890 to $3,275

Slate repairs are priced by the number of pieces, how hard the roof is to reach, and how rare your stone color is. A green or purple slate costs more to match than common gray. Copper valley and chimney flashing is the biggest swing on larger jobs. New slate roofs depend on stone grade, thickness, and whether the framing needs reinforcement.

How the job runs

STEP01

Call

Start with the house. We ask about the roof's age, the material you have, the material you want and any HOA rules, so the first visit is useful.

STEP02

Measure

Inspection and measurements. We measure every plane, check decking from the attic, count penetrations and photograph the existing roof before we price anything.

STEP03

Price

Line-item proposal. Tear-off, decking allowance, underlayment, flashing, ventilation and the roofing itself are listed separately, so you can compare honestly.

STEP04

Permit

Permit and materials. Where the city requires a reroof permit we pull it in our name, and materials are delivered the day before the tear-off.

STEP05

Build

Tear-off to ridge. Most homes are torn off, dried in and roofed in one or two working days, with the yard tarped and the gutters protected.

STEP06

Close

Final walk and records. We walk the finished roof with you, sweep for nails, pass any required inspection and hand over photos and product details.

Slate Roofing questions

Why do slate roofers use copper nails?

Slate can last a century or more, and steel nails rust long before that. Once a nail fails, the slate slides out of its course and leaves a gap. Copper nails resist corrosion for as long as the stone lasts. If a past repair used steel or galvanized nails, we usually find rust streaks below them and swap the fasteners when we reset those slates.

Can hail damage a slate roof?

Yes. Hard slate holds up to most hail, but very large stones crack thinner slates, and soft slate breaks more easily. Damage tends to show as clean cracks or broken corners on the windward slope. Because slate is costly, insurers usually pay to repair broken pieces rather than replace the roof unless the damage is widespread or the stone cannot be matched.

Is synthetic slate a good choice in Dallas?

For many homes, yes. Synthetic slate weighs far less than stone, so it suits houses that were never framed for natural slate. Many products carry a UL 2218 Class 4 rating, which some Texas insurers reward with premium discounts. It does not last as long as hard natural slate, and some historic reviews will not allow it on a protected facade.

What is a slate hook, and is it a proper repair?

A slate hook is a small copper or stainless strap nailed between the slates below, with a hooked end that cradles the bottom edge of the new slate. It is a standard, accepted repair method that avoids face-nailing. On street-facing slopes some homeowners prefer the nail-and-bib method because the tip of a hook shows slightly.

Related work

Services that often go with slate roofing

Roof Inspection

A roof inspection is a hands-on check of the roof surface, flashing, ventilation and attic for damage, leaks and wear. Dallas homeowners need one after hail or...

See roof inspection

Slate Roofing across the Dallas area

Need slate roofing?

Call our Dallas office any hour and describe what you are seeing.

Call (214) 910-6728
Call 24/7: (214) 910-6728