Skip to content
McCormickConstruction & Roofing · Dallas

Attic, Decking & Skylights

Roof decking replacement for Dallas homes and reroofs

A roof is only as strong as the wood under it, and soft, delaminated or rotted decking lets nails pull out, shingles buckle and leaks spread before anyone notices.

Roofer cutting out a water-stained, rotted OSB sheet on a stripped roof deck of a Richardson Texas home, new plywood
Quick answer

Roof decking replacement means cutting out rotted, soft or damaged sheathing and installing new plywood, OSB or plank boards before roofing. Dallas homes need it during reroofs, after long leaks, or when spaced plank decking cannot hold shingles. Typical costs run $68 to $94 per 4x8 sheet installed, and full redecking on a home can reach $3,850 to $9,640.

Roof decking, also called sheathing, is the layer of wood the roofing is nailed to. Older Dallas homes, roughly through the 1960s, often have 1x6 or 1x8 plank decking laid across the rafters, sometimes with gaps between boards that once suited wood shakes. Newer homes use 7/16 or 1/2 inch OSB or plywood panels. Each fails differently: planks crack or split along the grain, OSB swells and crumbles when it gets wet, and plywood can delaminate after years of heat and slow leaks.

We replace decking in two ways. During a full reroof, any soft or damaged sheets or boards are cut out and replaced after tear-off, before underlayment goes down. On repair jobs, we remove the roofing around a leak, open the deck to see how far the damage goes, and replace just that area. On gapped plank decking, we often overlay the planks with new 1/2 inch plywood or OSB so modern shingles have a solid surface and proper nail hold.

Signs your roof decking may need replacing

  • Spongy spots underfoot: The roof feels soft or bouncy between rafters when walked.
  • Sagging between rafters: Wavy lines on the roof surface show sheathing that has bowed down under weight or moisture.
  • Dark stains on the underside: Attic views reveal water-stained or blackened wood around past leaks.
  • Gapped plank decking: Older homes have spaced boards meant for wood shakes, now under asphalt shingles.
  • Nails that will not hold: Shingles lift or slide because fasteners pulled out of crumbling sheathing.
  • Mold or musty attic smell: Long-term moisture has reached the wood and is breaking it down.
Crew laying fresh plywood overlay over old spaced plank decking on a 1920s M Streets Dallas bungalow during a reroof

Our decking replacement process

  • After tear-off, we walk the bare deck sheet by sheet and mark every soft, cracked, delaminated or rotted section.
  • Damaged sheathing is cut back to the center of the nearest rafters so new pieces land on solid framing.
  • New plywood or OSB of matching thickness is fastened with ring-shank nails at the spacing the code and manufacturer call for.
  • H-clips go between panels in each truss bay where spans call for them, keeping edges level and adding stiffness.
  • On gapped plank decks, we lay a full plywood or OSB overlay so shingles get continuous nail hold.
  • We renail the existing good deck to current patterns, which helps wind uplift resistance before underlayment goes down.

Why Dallas decks fail and what we usually find

Heat is hard on sheathing. Attics in North Texas regularly exceed 140°F in summer, and OSB that spends decades in that heat dries, gets brittle at the edges, and loses nail hold. When a small leak adds moisture, OSB swells and crumbles much faster than plywood. We see this most on homes from the 1980s and 1990s in suburbs like Plano, Richardson and Carrollton, where first-generation OSB is reaching the end of its life.

Older Dallas neighborhoods have a different problem. Homes in the M Streets, Vickery Place and Winnetka Heights often still have the original plank decking from when they were built with wood shingles. Those boards can be solid old-growth lumber, but they were laid with gaps, and some have been nailed through by three or four generations of roofs. Foundation movement on clay soil can also twist a frame enough to crack planks along a line, which shows up as a ridge of broken boards.

Decking materials and when we use each

The right sheathing depends on rafter spacing, the roofing going on top, and the age and style of the house. Matching thickness matters too, or the new roofing shows a ridge or dip where old and new sheathing meet on the finished slope.

MaterialBest forWhat to know
7/16 inch OSBMost modern Dallas homes with 24 inch truss spacingLow cost; swells if wet for long periods, so dry-in matters.
1/2 inch CDX plywoodRepairs and homes where moisture is a concernHandles brief wetting better than OSB and holds nails well.
5/8 inch plywoodTile, slate and heavier roofingStiffer for heavy loads and wide rafter spans.
Radiant barrier OSBHomes where attic heat drives AC costsFoil faces the attic; cost premium is small during a reroof.
Replacement plank boardsHistoric homes keeping original deckingUsed to patch sound plank decks; matched to existing thickness.

What roof decking replacement costs in Dallas

$68 to $94 per 4x8 sheet
installed decking replacement during a reroof
7/16 inch OSB replacement, per sheet$68 to $82
1/2 inch plywood replacement, per sheet$76 to $94
Plank deck overlay, per square$145 to $215
Rafter sistering, per rafter$185 to $340
Full deck renailing, per square$22 to $38

Most reroofs need a few sheets replaced, so we price decking per sheet and count it after tear-off. Full redecking or overlaying a gapped plank deck is a larger line item. Price moves with thickness, plywood versus OSB, radiant barrier upgrades, roof pitch, and how much framing repair is found under the bad sheathing.

How the job runs

STEP01

Call

Describe the symptom. Hot upstairs rooms, a damp attic smell, a drip around a skylight or a solar array that needs to come off: tell us what you are noticing.

STEP02

Inspect

Roof and attic together. We look at intake and exhaust, decking condition, insulation depth and every penetration from both sides of the roof deck.

STEP03

Price

Clear scope. You get a written scope that says what changes, why it helps in a Dallas summer and what it costs.

STEP04

Install

Work done clean. Our crew protects the living space below, works from the roof side where possible and seals every opening it touches.

STEP05

Verify

Check the result. We confirm airflow paths, flashing laps and fit, then photograph the finished work for your file.

Roof Decking Replacement questions

How do you know how much decking needs replacing before the old roof comes off?

We get a good idea from the attic and from soft spots on the roof, but the real count only comes after tear-off. That is why we price decking per sheet in writing ahead of time. You see the number of sheets replaced in the final invoice, and we photograph bad sections before they come out.

Should I replace plank decking or overlay it?

Most plank decks can stay if the boards are solid; we overlay them with new plywood or OSB so shingles get continuous nail hold. Overlay adds some weight and height at the eaves, which we handle with new drip edge and trim. If many boards are rotted, removing planks entirely is sometimes cleaner.

What are H-clips, and does my roof need them?

H-clips are small metal pieces that slip between the edges of two sheathing panels between rafters or trusses. They keep the edges level and help share load between panels. Many manufacturers and building codes call for them on certain spans, especially with 24 inch spacing and thinner OSB.

Does insurance pay for decking replacement after storm damage?

When decking is damaged by a covered event, or needs to be replaced to meet code during a covered reroof, many policies include it. Old rot from long-term leaks is usually excluded. We photograph the decking after tear-off so you and your insurer can see what was replaced and why.

Related work

Services that often go with roof decking replacement

Roof Replacement

Roof replacement removes the existing roofing down to the decking and installs a complete new system: decking repairs, underlayment, flashing, ventilation and new...

See roof replacement

Attic Ventilation

Attic ventilation is the balance of soffit intake and ridge or roof exhaust that moves heat and moisture out of the attic. Dallas homes need it fixed when attics...

See attic ventilation

Roof Decking Replacement across the Dallas area

Need roof decking replacement?

Call our Dallas office any hour and describe what you are seeing.

Call (214) 910-6728
Call 24/7: (214) 910-6728