Skip to content
McCormickConstruction & Roofing · Dallas

Roof Replacement & Materials

Asphalt shingle roofing in Dallas, installed by our crews

Two roofs built with the same asphalt shingle can last very different lengths of time in Dallas, and the difference is almost always in how they were installed.

Roofer nailing charcoal architectural asphalt shingles along a chalk line on a two-story Dallas home, starter strip and
Quick answer

Asphalt shingle roofing is a roof system of fiberglass-mat shingles coated with asphalt and granules, installed over underlayment with starter, flashing and ventilation. It suits most Dallas homes and budgets. Architectural shingles are the common choice today over thinner 3-tab styles. Installed Dallas pricing runs about $4.25 to $6.85 per square foot, including tear-off.

Asphalt shingles cover most of the houses in Dallas because they are affordable, easy to repair and available in a wide range of colors and profiles. Modern shingles are a fiberglass mat coated in asphalt and topped with ceramic granules that shade the asphalt from UV. Architectural, or laminated, shingles add a second layer that gives the roof depth and more weight in wind. Most Dallas homes we reroof today get laminated shingles rather than flat 3-tab.

What decides the life of the roof is the details. Starter strip at the eaves and rakes so the first course seals. Nails driven in the manufacturer's nailing zone, flush and not overdriven. Correct exposure on every course. Closed-cut or open valleys built over ice-and-water shield. Proper ventilation so the shingles are not baked from the attic. Our crews install every shingle roof to the manufacturer's written instructions, because that is also what keeps the warranty valid.

Signs your shingles are wearing out

  • Granules in gutters: heavy grit in gutters and at downspout outlets shows the protective layer is washing away.
  • Brittle tabs: shingles that crack instead of flexing when lifted, a sign the asphalt has dried out in the heat.
  • Uneven color: patches lighter or darker than the rest from granule loss or algae streaking on shaded slopes.
  • Cracks along the tabs: splits running across shingles as the mat shrinks and ages.
  • Visible nail rows: lifted courses that expose nails, often from poor original nailing or broken seals.
  • Lumpy texture: blistering or raised spots, sometimes caused by trapped moisture or poor ventilation.
Newly finished weathered-wood architectural shingle roof on a suburban Dallas house with clean closed-cut valleys and

How we build an asphalt shingle roof

  • Synthetic underlayment is laid over the full deck, with ice-and-water shield in valleys, at walls and around every penetration.
  • New drip edge goes on at eaves and rakes, followed by a dedicated starter strip with factory sealant at the edge.
  • Shingles are laid at the manufacturer's exposure and fastened with four or six nails per shingle in the nailing zone, matched to the wind class the roof needs.
  • Valleys are built closed-cut or open with metal, with the cut line trimmed back from the centerline so water stays in the channel.
  • Step flashing is woven at every wall, and new pipe boots and vents are installed with the correct shingle overlap.
  • Hip and ridge caps designed for that shingle line are installed over a ridge vent where ventilation calls for it.

How Dallas conditions affect shingle choice

In North Texas, the biggest enemy of asphalt shingles is heat. Shingles here are exposed to long, bright summers with attic temperatures often above 140°F, and that steady heat drives oils out of the asphalt. Lighter colors and shingles with reflective granules reflect more sunlight, which helps keep the attic cooler. Proper ventilation matters even more than color, because a shingle baked from both sides ages quickly, no matter how light its color is.

Storms are the other factor. Dallas gets strong spring wind and hail, so we steer homeowners away from thin 3-tab shingles and toward architectural or impact-rated products. Under heavy tree cover in older neighborhoods, algae-resistant granules help limit dark streaking on north and shaded slopes. Many HOAs also restrict color families, so we confirm your neighborhood's rules before you settle on a color. Getting that approval first keeps a finished roof from becoming an HOA dispute.

Asphalt shingle types compared

Not all asphalt shingles are the same. Profile, thickness and impact class all affect how a roof holds up to Dallas weather and how it looks from the street. These are the shingle types we install most and how they differ.

OptionBest forWhat to know
3-tab shinglesBudget roofs, rental properties and shedsThinner and flatter; lower wind and hail tolerance than laminated shingles
Architectural (laminated) shinglesMost Dallas homesTwo layers laminated for depth and strength; the standard choice today
Designer or luxury shinglesHomes wanting a slate or shake lookHeavier and thicker, with bold shadow lines and higher cost
Class 4 impact-resistant shinglesHail-prone areas and insurance savingsModified asphalt or reinforced mats rated to UL 2218 Class 4
Cool roof reflective shinglesHomes with high cooling billsGranules reflect more sunlight; color choices are somewhat lighter

What asphalt shingle roofing costs in Dallas

$4.25 to $6.85 per sq ft
installed asphalt shingle roof in Dallas, including tear-off
3-tab shingles installed, per square$345 to $485
Laminated architectural shingles, per square installed$415 to $685
Designer shingles installed, per square$615 to $965
Synthetic underlayment, per square$22 to $46
Starter strip and drip edge, per 10 feet$34 to $68

Shingle type is the biggest variable, from 3-tab at the low end to designer and impact-rated lines at the top. Roof pitch, number of stories, valleys and penetrations add labor. Decking replacement, upgraded ventilation and premium underlayment each add to the total. Manufacturer warranty terms depend on the product line and installer registration, so we explain those options when you choose a shingle.

How the job runs

STEP01

Call

Start with the house. We ask about the roof's age, the material you have, the material you want and any HOA rules, so the first visit is useful.

STEP02

Measure

Inspection and measurements. We measure every plane, check decking from the attic, count penetrations and photograph the existing roof before we price anything.

STEP03

Price

Line-item proposal. Tear-off, decking allowance, underlayment, flashing, ventilation and the roofing itself are listed separately, so you can compare honestly.

STEP04

Permit

Permit and materials. Where the city requires a reroof permit we pull it in our name, and materials are delivered the day before the tear-off.

STEP05

Build

Tear-off to ridge. Most homes are torn off, dried in and roofed in one or two working days, with the yard tarped and the gutters protected.

STEP06

Close

Final walk and records. We walk the finished roof with you, sweep for nails, pass any required inspection and hand over photos and product details.

Asphalt Shingle Roofing questions

How long do asphalt shingles last in Dallas?

In North Texas heat, architectural shingles commonly last about 18 to 25 years with good ventilation and no major storm damage. Thin 3-tab shingles often wear out sooner. A single severe hailstorm can end a roof's life early, which is why many Dallas homeowners consider impact-rated shingles when replacing.

What color shingle is best for a Dallas home?

Lighter grays, weathered woods and tans reflect more heat than black or very dark browns, which can help the attic run a little cooler. Your HOA may limit choices, and the color should suit the brick or siding. We bring full-size samples so you can see them against your house in daylight.

What is the difference between 3-tab and architectural shingles?

A 3-tab shingle is a single flat layer cut into three tabs. An architectural shingle bonds two layers together, which makes it thicker, heavier, more wind resistant and more dimensional. Architectural shingles cost a bit more but generally hold up better to Dallas storms and last longer.

Why does nail placement matter so much?

Shingle wind classifications assume nails are driven in a narrow zone printed on the shingle, through both layers of a laminated shingle and into the deck. Nails driven too high miss the lower layer and the course beneath, so wind can pull the shingle loose. Overdriven nails cut the mat. We check nailing throughout the install.

Related work

Services that often go with asphalt shingle roofing

Roof Replacement

Roof replacement removes the existing roofing down to the decking and installs a complete new system: decking repairs, underlayment, flashing, ventilation and new...

See roof replacement

Attic Ventilation

Attic ventilation is the balance of soffit intake and ridge or roof exhaust that moves heat and moisture out of the attic. Dallas homes need it fixed when attics...

See attic ventilation

Asphalt Shingle Roofing across the Dallas area

Need asphalt shingle roofing?

Call our Dallas office any hour and describe what you are seeing.

Call (214) 910-6728
Call 24/7: (214) 910-6728