Skip to content
McCormickConstruction & Roofing · Dallas

Roof Replacement & Materials

Impact-resistant Class 4 roofing for Dallas hail

If your Dallas roof has been replaced after hail once already, a Class 4 impact-resistant roof is the most direct way to lower the odds that the next storm puts you through it again.

Roofer installing thick Class 4 impact-resistant architectural shingles on a two-story home in a Collin County suburb
Quick answer

Impact-resistant roofing uses materials rated UL 2218 Class 4, the top impact class, to better resist hail damage. In Dallas, it is a common choice when replacing after a storm or when an insurer offers a premium discount. Class 4 shingles usually add about $0.85 to $1.65 per square foot over standard architectural shingles, for a total of about $5.15 to $8.40 installed.

Impact-resistant roofing is tested under UL 2218, a standard that drops steel balls of increasing size onto roofing samples. Class 4 is the highest class, meaning the material resisted a two-inch steel ball dropped from about 20 feet without cracking. In shingles, that performance usually comes from asphalt modified with rubber-like polymers (often called SBS) or from reinforced mats that flex instead of fracturing. The class is printed on the bundle wrapper.

No roof is hail-proof, and very large hail can still damage Class 4 materials. But in the hail sizes that hit Dallas most often, impact-rated roofs tend to come through with far less functional damage than standard shingles. Our crews install Class 4 shingles, stone-coated steel and metal systems, and we keep the paperwork your insurer needs to confirm the Class 4 status, including product labels and the installation date.

When a Class 4 roof makes sense

  • Repeat hail claims: your roof has been replaced or repaired for hail more than once in the past decade.
  • Insurer discount offered: your carrier gives a premium reduction for a Class 4 roof, often noted on your renewal.
  • High wind and hail deductible: a percentage deductible makes each hail claim expensive out of pocket.
  • Planning to stay: you expect to be in the home long enough to benefit from fewer storm repairs.
  • Neighborhood in a hail track: your area gets hit every few springs, especially in Collin and Denton County suburbs.
  • Replacement already needed: if the roof is coming off anyway, the upgrade cost is just the difference in material.
Close view of a UL 2218 Class 4 rated shingle bundle wrapper beside newly laid impact-resistant shingles on a

How we install impact-resistant roofs

  • We help you choose between Class 4 shingle lines, stone-coated steel or metal based on your budget, HOA rules and insurance goals.
  • The full roof is torn off and decking is checked, since a soft deck under Class 4 shingles reduces how well they absorb impacts.
  • Underlayment, ice-and-water shield, starter and flashing are installed to the manufacturer's specifications for that product.
  • Class 4 shingles and matching rated hip and ridge caps are installed, because standard caps can break first in hail.
  • We photograph the product wrappers and labels showing the UL 2218 Class 4 classification and save them with your job file.
  • You receive the documentation your insurer asks for, typically an invoice listing the product, its impact class and the completion date.

Why Class 4 is popular across DFW

North Texas is in hail alley, and the hail season from roughly March through June brings storms that can drop large stones over a narrow path in minutes. The April 2016 storms that hit Wylie, Plano, Garland and Murphy with very large hail damaged a huge number of roofs in a short time. Many homeowners in those areas have since chosen impact-rated roofs when replacing, and the trend has spread across the Metroplex.

Insurance plays a big part. Many Texas homeowner policies carry a percentage wind and hail deductible, often 1% to 2% of dwelling coverage, which can mean several thousand dollars out of pocket per claim. Some Texas insurers give premium discounts for UL 2218 Class 4 roofs. Ask your agent how much your carrier offers and what proof they need, since discounts and requirements vary between companies. Some carriers also ask for a copy of the invoice at renewal.

Class 4 roofing materials compared

Several roofing materials carry a UL 2218 Class 4 classification. They differ in how they resist hail, how they look and what they cost. These are the impact-resistant options Dallas homeowners choose most and what to expect from each one.

OptionBest forWhat to know
SBS polymer-modified shinglesA standard shingle look with better hail performanceRubberized asphalt flexes under impact; installs much like architectural shingles
Reinforced-mat Class 4 shinglesBudget-conscious upgradesA reinforcing layer on the back of the shingle resists cracking
Stone-coated steelShake, shingle or tile looks with metal strengthGranule-coated steel panels resist hail and wind; lighter than tile
Standing seam metalLong service life and modern stylesThicker gauge resists denting better; cosmetic dents may still occur

What impact-resistant class 4 roofing costs in Dallas

$5.15 to $8.40 per sq ft
installed Class 4 shingle roof in Dallas, including tear-off
Class 4 shingles installed, per square$515 to $840
Upgrade over standard architectural, per square$85 to $165
Class 4 rated hip and ridge caps, per 30 feet$135 to $265
Strip old roof and haul off, per square$65 to $128
Class 4 paperwork packet for your insurer$15 to $35

The Class 4 upgrade cost is the difference between standard and impact-rated material, plus rated hip and ridge caps. Steep pitches, two-story homes and decking replacement add labor the same way they do on any reroof. Stone-coated steel and standing seam metal sit above this range. Any insurer discount depends on your carrier and policy, so we leave that number to your agent.

Before filing, run your numbers through our wind and hail deductible calculator.

How the job runs

STEP01

Call

Start with the house. We ask about the roof's age, the material you have, the material you want and any HOA rules, so the first visit is useful.

STEP02

Measure

Inspection and measurements. We measure every plane, check decking from the attic, count penetrations and photograph the existing roof before we price anything.

STEP03

Price

Line-item proposal. Tear-off, decking allowance, underlayment, flashing, ventilation and the roofing itself are listed separately, so you can compare honestly.

STEP04

Permit

Permit and materials. Where the city requires a reroof permit we pull it in our name, and materials are delivered the day before the tear-off.

STEP05

Build

Tear-off to ridge. Most homes are torn off, dried in and roofed in one or two working days, with the yard tarped and the gutters protected.

STEP06

Close

Final walk and records. We walk the finished roof with you, sweep for nails, pass any required inspection and hand over photos and product details.

Impact-Resistant Class 4 Roofing questions

Will a Class 4 roof lower my insurance premium?

It might. Some Texas insurers offer a discount on the wind and hail portion of the premium for a UL 2218 Class 4 roof, while others do not. Call your agent before choosing a product, ask what the discount is and what proof they need. We list the product details and its UL 2218 class on your invoice.

Can Class 4 shingles still be damaged by hail?

Yes. Class 4 means the shingle passed a two-inch steel ball impact test, not that it cannot be damaged. Very large or wind-driven hail can still fracture impact-rated shingles. In the hail sizes common around Dallas, they tend to show far less functional damage, and they often need fewer repairs after a storm.

Do impact-resistant shingles look different?

Most Class 4 shingles look like standard architectural shingles from the street, and they come in similar color families. Some lines are slightly thicker or heavier. Your HOA usually treats them the same as any other shingle with the same color and profile, but we can supply product sheets for review.

Are Class 4 shingles harder to repair later?

They repair much like standard shingles, though SBS modified shingles stay flexible even in heat, so they handle foot traffic well. Matching later can be easier because you can buy the same line. Keep a bundle of leftover shingles in the garage after your install for future spot repairs.

Related work

Services that often go with impact-resistant class 4 roofing

Roof Replacement

Roof replacement removes the existing roofing down to the decking and installs a complete new system: decking repairs, underlayment, flashing, ventilation and new...

See roof replacement

Impact-Resistant Class 4 Roofing across the Dallas area

Need impact-resistant class 4 roofing?

Call our Dallas office any hour and describe what you are seeing.

Call (214) 910-6728
Call 24/7: (214) 910-6728